justnail
|
|
|
|
Feature |
|
Use this tool to grind your nails and make your nails smoother and more beautiful. |
|
|
|
Instruction |
|
Installation instructions: 1. Before installation turn off the tool and disconnect it from the power supply. 2. Remove the collet nut and collet from the rotary tool by first holding down the spindle lock button and turning the collet nuts lightly until the spindle-lock locks the spindle in place.
Guidelines for working: 1. Keep dust out of eyes and lungs by using protective eye wear & a dust mask. 2. Bits & wheels will break under too much pressure. Keep a light touch. Use sharp accessories & bits.
Warning for Low Voltage Battery : Recommend to charge the battery immediately when the red light is blinking. (It shows that the battery remains 20%)
To protect the battery : the battery is not charging while user use the handpiece with connection DC Adaptor.
When the rotation switch is adjusted to the middle, it is pause function. For safety and prolonging the usage life, the pause function needs to be used under consideration. If you want to replace the bits, switch rotation direction, leave temporarily, etc., you should turn off the controller first instead of using "pause". |
|
|
|
Content |
|
Handpiece (H324): Rotation (r.p.m) : 0~30,000rpm Dimensions : ?19.8 x L126.5(mm) Weight : 162g * 30,000 RPM High Performance Handpiece * Chuck Locking * Easy bit change * Light weight handpiece * Uses standard 2.35mm (3/32") bits * High torque * Quiet operation * No vibration
Contorller: Input : 30V 1A Output : 24V 0.8A Size : 65(W) x 129(D) x 36(H) Weight : 388g
* Rechargeable Controller * Up to 8 hours battery life * 3.5 hours battery full charge * Variable speed control * Rechargeable battery * Clips to belt * Forward/Reverse Rotation and Pause Switch
Adaptor: Input : 100-240V~ 47-63Hz 0.9-0.34A Output : 30V 1A max
|
|
|
|
Other |
|
Warning:
1. Keep children away.
2. Keep work area clean.
3. Don't force tool.
4. Avoid accidental starting.
5. Before connection the tool. To a power source, be sure voltage supplied is the same as that specified on the nameplate of the tool.
6. Keep your hand. Do not touch the bit or collet after use.
7. Always hold the tool. Firmly in your hands during the star-up. The reaction torque of the motor, as it accelerates to full speed, can cause the tool to twist.
8. Remove adjustting keys and wrenches. Form habit of chucking to see that keys & adjusting wrenches removed from tool before turning it on.
9. Keep away from water and fire. |
|
|
|
|
|